Warning! You are consulting an archived documentation:
This product is not anymore manufactured or marketed by BAMO
Do not hesitate to contact us if you are looking for a substitution product certified or if you have a question
Alphanumeric back lighted LCD display
Parameters and programming:
Input sensor signal, scale
Measuring range
Displayed unit (m, cm, %, ppm, mg, g)
Scale from 0,001 to 9999
Wall mounting IP 65 or panel mounting
3 relay outputs, 2 analogical outputs 4-20mA
1 alarm output on over-ranging and temperature
OPTIONS: Built in data logger (on MMC card) RS 422 Interfacing, J-BUS protocol Extension for 2nd measurement input
DESCRIPTION
The BAMOPHOX 216 offers high flexibility on use mixing different built-in programmes for regulation, thresholds, temperature compensation, and alarms. The 2 lines back lighted display, 16 alphanumerical characters, provides an easy measurement and temperature reading in any conditions. It also displays the configuration menu and settings of thresholds, analogical outputs and operation data modes.
To allow a quick and easy diagnostic after configuration a simulation program is built-in with direct actuation on contacts outputs and analogical outputs. A copy of the signal is available on the 4-20 mA output; it is galvanic insulated; it can be set up within the complete measuring range. Temperature measurement is also available on a 4-20 mA output.
EXTENSION TERMINAL
An extension terminal (wall or panel mounting):
- Allows a second measurement parameter (pH, Flow, Conductivity, etc.)
- Data from this blind device are displayed on the main device (second line display).
- A 4 wires shielded cable is used to link both devices (longest length is 500m)
- The options RS422 and the data logger are shared between both BAMOPHOX.
- May be fitted inside a cabinet on a rail DIN.
TECHNICAL FEATURES
Displayed parameters: Measurement values - Configuration Menu - Temperature value Display: Back lighted - 2 lines of 16 alphanumerical characters ; 9.2 mm high Indication: LED alarms status Programming: 8 push buttons keyboard on front face - Keyword protected
Measuring range
Unit: m, cm, %, ppm, mg, g, [none]
Scale: ranging through 4 digits from 0.001 to 9999, sliding decimal point
Input signal: 4-20 mA
Temperature sensor input: Pt 100 Ω /0°C, range -20 …+160°C
Relay outputs: 4 closing contacts (Silver alloy), voltage free
Thresholds: 3 programmable independent thresholds - with adjustable hysteresis 0…100% - and adjustable timer from 0 to 9999 s
Switching power: 250 V AC / 3 A , 30 V DC / 3 A
Switching capacity: 100 mA, 5 V DC (minimum)
4th relay output (S4): Alarm
Measurement output: 0/4-20 mA (maxi 600 Ω), galvanic insulated
Temperature output: 0/4-20 mA (max 600 Ω), scalable, galvanic insulated
Main power supply: 230 V AC / 50-60 Hz [other on request] - Consumption 10 VA
Models:
Panel mounting, IP65, 72 x 144 mm, connections on screw terminal IP40
Idem DIN Rail mounting, only for blind monitor
Wall mounting, IP65, cable glands, connections on screw terminal