BAMOPHOX 216 Data monitor

General Catalog 216-01

BAMOPHOX 216

Data monitor – Data recorder

BAMOPHOX 216

Previous Product

Next Product

PDF Version

User Manual

Ask a Quotation

Warning! You are consulting an archived documentation:

This product is not anymore manufactured or marketed by BAMO
Do not hesitate to contact us if you are looking for a substitution product certified or if you have a question

Alphanumeric back lighted LCD display
Parameters and programming:
Input sensor signal, scale
Measuring range
Displayed unit (m, cm, %, ppm, mg, g)
Scale from 0,001 to 9999
Wall mounting IP 65 or panel mounting
3 relay outputs, 2 analogical outputs 4-20mA
1 alarm output on over-ranging and temperature
OPTIONS:
Built in data logger (on MMC card)
RS 422 Interfacing, J-BUS protocol
Extension for 2nd measurement input

DESCRIPTION

The BAMOPHOX 216 offers high flexibility on use mixing different built-in programmes for regulation, thresholds, temperature compensation, and alarms. The 2 lines back lighted display, 16 alphanumerical characters, provides an easy measurement and temperature reading in any conditions. It also displays the configuration menu and settings of thresholds, analogical outputs and operation data modes.

To allow a quick and easy diagnostic after configuration a simulation program is built-in with direct actuation on contacts outputs and analogical outputs. A copy of the signal is available on the 4-20 mA output; it is galvanic insulated; it can be set up within the complete measuring range. Temperature measurement is also available on a 4-20 mA output.

EXTENSION TERMINAL

An extension terminal (wall or panel mounting):

- Allows a second measurement parameter (pH, Flow, Conductivity, etc.)

- Data from this blind device are displayed on the main device (second line display).

- A 4 wires shielded cable is used to link both devices (longest length is 500m)

- The options RS422 and the data logger are shared between both BAMOPHOX.

- May be fitted inside a cabinet on a rail DIN.

TECHNICAL FEATURES

Displayed parameters: Measurement values - Configuration Menu - Temperature value
Display: Back lighted - 2 lines of 16 alphanumerical characters ; 9.2 mm high
Indication: LED alarms status
Programming: 8 push buttons keyboard on front face - Keyword protected

Measuring range

Unit: m, cm, %, ppm, mg, g, [none]

Scale: ranging through 4 digits from 0.001 to 9999, sliding decimal point

Input signal: 4-20 mA

Temperature sensor input: Pt 100 Ω /0°C, range -20 …+160°C

Relay outputs: 4 closing contacts (Silver alloy), voltage free

Thresholds: 3 programmable independent thresholds - with adjustable hysteresis 0…100% - and adjustable timer from 0 to 9999 s

Switching power: 250 V AC / 3 A , 30 V DC / 3 A

Switching capacity: 100 mA, 5 V DC (minimum)

4th relay output (S4): Alarm

Measurement output: 0/4-20 mA (maxi 600 Ω), galvanic insulated

Temperature output: 0/4-20 mA (max 600 Ω), scalable, galvanic insulated

Main power supply: 230 V AC / 50-60 Hz [other on request] - Consumption 10 VA

Models:

Panel mounting, IP65, 72 x 144 mm, connections on screw terminal IP40

Idem DIN Rail mounting, only for blind monitor

Wall mounting, IP65, cable glands, connections on screw terminal

OPTION (RS422+ Logger)

Communication: RS422 output, J-BUS link, binary slave mode, 2400 to 9600 bauds

Data Logger: Cycle average measurement record, with a programmable period, 150000 records maxi on MMC (multi-media-card) / External driver necessary

CE Mark: According to EC directives (72/23/EEC) and

EMV Guidelines: RL 89/336/EEC

General Catalog 216-01
08/11/2018 10:19

Data monitor – Data recorder
BAMOPHOX 216