 |
 Complete measuring system (assembly sold separately) |
| Measured parameter | : | Ozone |
| Applications |
:
|
Water treatment (quality of drinkable water), sea water,
R.O. produced water ( >10 μS/cm )
e.g.: Bottles disinfection, CIP etc.
Surfactants: tolerated
|
| Measuring system | : | Closed cell with 2 electrodes and electrolyte |
| Supply voltage | : | 12 ... 30 V DC (Load: 500 to 900 Ω) |
| Output signal |
:
|
4-20 mA, screw connector, (2x 1mm²)
No galvanic insulation
|
| Operating temperature |
:
|
From 1 to 45 °C
Automatic temperature compensation
|
| Operating pressure |
:
|
0.5 bar without retaining ring
1 bar max. with retaining ring
(No vibrations; No pulsating flow)
|
| Flow-rate | : | About 15 to 30 l/h |
| pH operating range | : | Between pH 2 and pH 11 |
| Zero adjustment | : | Not necessary (from factory) |
| Slope calibration | : | Only 1 point with BAMOPHAR 194 |
| Materials | : | PVC-U and AISI 316 Ti (1.4571) |
| Dimensions | : | O.D. 25 mm, length 220 mm (4-20 mA) |
| Code | Reference | Measuring range | Resolution |
| 193 148 | OZ10.MA2 | 0.005...2 mg/l | 0.001 mg/l |
| 193 149 | OZ10.MA5 | 0.05...5 mg/l | 0.01 mg/l |
| 193 150 | OZ10.MA10 | 0.05...10 mg/l | 0.01 mg/l |
| Spare parts | |||
| 193 914 | M10G-03 | Diaphragm for OZ10 sensor | |
| 193 958 | EOZ 7/W | Electrolyte for OZ10 (100 ml) | |
