The NIVOPOINT MR series of magnetic float level switches are applicable for point level switching (high or low) or for alarm (overfill, empty) in liquids.In case of liquids containing metal particles protect the device by using a magnetic filter. The apparatus met requirements specified for mechanical strength with reduced impact energy (4 J; 1 kg; 0.4 m). On the basis of the above the place and way of installation should guarantee the protection of the unit against external mechanical effects during service.

A magnetic float moving along side the protection tube tracking the level, is activating the reed relays incorporated the tube. After passing of the float, the reed relays will retain their output state. The device is capable of direct switching a load within its specification.

Probe length: 0,25...3m

Material of wetted parts:
Stainless steel DIN 1.4571 (316Ti)
or PP, PVDF on request

Max. process pressure: 2,5 MPa (25 bar) at 20°
Medium density: min. 0,7g /cm³
Max. ambient T °C class: T6 80 °C T5 95 °C T4 85 °C T3 70 °C
Max. medium T °C class: T6 85 °C T5 100 °C T4 135 °CT3 150 °C
Output: 1 to 5 pcs. NO or NC reed relays
Switching rate: 120 W / VA, 250 V AC, 3 A / reed relay, max. 9 A
Switch differential: < 10 mm
Dist. between switch points: min. 110 mm
Wire cross section: 0,5 to 2,5 mm²
Process connection: 1" or 2" BSP/ NPT
Sealing material: Klingerit 400
Electrical protection: Class I
Mechanical protection: IP 65 according to EN 60529:2001
Weight: 0.45 kg + 0.3 kg/m
Storage conditions: -25 °C to + 60 °C, Relative humidity max. 98%
Approvals: ATEX ll 2G EEx d llC T3-T6